How to Mount Snowboard Bindings

Before hitting the slopes on your snowboard, it is essential to ensure that your bindings are installed properly. This concise guide will lead you through the process of attaching snowboard bindings to your board. It is a relatively simple task, and with your gear and a Phillips screwdriver in hand, you'll be prepared. Bear in mind that snowboard binding systems can vary by model, and this video demonstrates the system commonly known as traditional or classic, where the bindings need to be screwed onto the board:

1. Position the binding on your board with the buckles facing outwards and open them.
2. Lift the bottom rubber pad to reveal the mounting area.
3. Insert the mounting disc inside the binding.
4. A small arrow on the binding indicates the current angle.
5. Rotate the disc to set your preferred angle and press it down.
6. Align the binding with the recommended position using the markings on the board.
7. With a large Phillips head screwdriver, secure the screws in a criss-cross pattern.
8. Close the bindings and replicate these steps for the other binding.

Your bindings are now installed!